Welcome to your new TA-SCOPE

- Instrument and Measuring Equipment 

- Handheld Display

- Keypad

- Dp Sensor

- Connections for Cables

- Quick Measure

- PC Communication

- Batteries – Capacity & Charging 

 

Instrument and Measuring Equipment

1  Handheld unit (Hh)
2  Dp Sensor unit (DpS)
3  Digital Temperature Sensor (DTS)
4  Measuring hose, 400 mm red
5  Measuring hose, 400 mm blue
6  Measuring needles
7  Measuring hoses with twin needle, 150 mm
8  Flashlight
9  Mirror
10  Chucks for older valves, red/blue
11  Allen Keys 3 mm/5 mm
12  Spanner for measuring points at older valves
13  Presetting tool TBV-C/TBV-CM/TBV-CMP
14  Spare filters
15  Chain for mounting
16  Neckstrap
17  USB-cables for connection; Hh – DpS and Hh – PC
18  Charger for Handheld and Dp Sensor
19  Case
20  TA-Select Software
21  User manual
22  Calibration certificate for DpS and DTS
23  Quick Guide

 

 

 

Handheld Display
The display is divided into three areas, the Information bar, the Main display and the Function keys.

1. Information bar
Icons on the Information bar display details of battery status, connection type and intensity.

2. Main display
Instructions on how to carry out hydronic functions are shown on the Main display.

3. Function keys
The three top keys on the keypad are used for selecting options shown in the lower part of the Main display. The options vary depending on which menu is currently shown.

Keypad
The alphanumeric keys function in the same manner as most mobile phones. Select a letter by repeatedly pressing the key until the desired letter appears. Prolonged press enters a digit.

- - Press function key “Language” to select desired language. - -

 

Dp Sensor

 Wireless communication

 

 Battery symbol

 

 On/Off

 

NOTE! Never leave water in the Dp Sensor when risk of freezing exists (i.e., in the car during winter).

 

 

 

Connections for Cables

Handheld Connections
1  Charger
2  USB to PC
3  Digital Temperature Sensor
4  USB to Dp Sensor

 

Dp Sensor Connections
1 Charger
2 USB to Handheld
3 Digital Temperature Sensor 1
4 Digital Temperature Sensor 2

 

 

 

 

Quick Measure

Measure Flow
1. Connect measuring equipment.


2. Navigate to Quick Measure in the main menu and press enter.


3. Navigate to Measure Flow and press enter.


4:1. Input the given Design Flow for the terminal.
4:2.  Define valve.
4:3.  Input Valve Opening.
4:4.  Define fluid.


5. Press function key Measure to start measuring.


6. Calibration of the Dp Sensor.

 

 

 

TA-SCOPE automatically demands calibration when needed. When requested – press the calibration button (1) on the Dp Sensor. Release the calibration button (2) when message “calibration ready” is displayed.

 

 

 

PC Communication

Transfer of Data
Connect TA-SCOPE to your PC to transfer data, e.g., hydronic networks and collected system information to and from the TA-Select software. Use the USB-cable to connect the Handheld to a PC and the TA-Select software will automatically connect to TA-SCOPE. Simply  follow the instructions on the PC.

Software Upgrade
When a new version of the TA-SCOPE software is available, TA-Select will automatically suggest an upgrade. Simply connect your TA-SCOPE and follow the instructions on the PC.

 

Batteries – Capacity & Charging

Upon delivery the TA-SCOPE is fully charged and prepared to start balancing immediately. The Information bar on the Handheld displays the battery status for both Handheld and Dp Sensor whenever communication is established.
The Handheld and Dp Sensor are charged separately and TA-SCOPE is delivered with two chargers accordingly.
If the Dp Sensor is low on power it can be connected to the Handheld for additional power supply and continued measuring/balancing.